Recovering data after physical damage

Recovering data after physical damage

A wide variety of failures can cause physical damage to storage media. CD-ROMs can have their metallic substrate or dye layer scratched off; hard disks can suffer any of several mechanical failures, such as head crashes and failed motors; tapes can simply break. Physical damage always causes at least some data loss, and in many cases the logical structures of the file system are damaged as well. This causes logical damage that must be dealt with before any files can be salvaged from the failed media.

Most physical damage cannot be repaired by end users. For example, opening a hard disk in a normal environment can allow dust to settle on the surface, causing further damage to the platters and complicating the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs; therefore, costly data recovery companies are consulted to salvage the data. These firms often use Class 100 cleanroom facilities to protect the media while repairs are being made.

Despite this, there are many accounts of users getting a bad disk going long enough to pull their data off, often via slightly bizarre tricks. These include making the drive cold (in the freezer) or spinning it manually on the ground, both actions being used to unstick a jammed platter. Most data recovery professionals recommend against the use of tricks such as these, as they can cause additional physical damage to the drive if done improperly (and in many cases, even when done properly).